US
0 suggestions are available, use up and down arrow to navigate them
PROCESSING APPLICATION
Hold tight! We’re comparing your resume to the job requirements…
ARE YOU SURE YOU WANT TO APPLY TO THIS JOB?
Based on your Resume, it doesn't look like you meet the requirements from the employer. You can still apply if you think you’re a fit.
Job Requirements of Lab Technician:
-
Responsibilities
- Follow directions provided by the Lab Manager and QA Manager.
- Test incoming fabric, finished fabric, and coated fabric in accordance with finished fabric specifications and customer requirements across all company production areas.
- Accurately and thoroughly document test results on lab test forms within the specified time frames.
- Operate and verify Instron equipment, including load cells.
- Carry out special tests as assigned by the Lab Manager or QA Manager.
- Test incoming product mixes as per the batch card instructions.
- Immediately inform frame operators and the production shift supervisor of any out-of-spec test results.
- Maintain a clean and organized work environment, adhering to safety protocols; be capable of using fire extinguishers, following the fire evacuation plan, using eye wash stations, and responding to chemical spills.
- Understand urethane coating requirements and relevant testing processes.
- Be knowledgeable about all testing equipment, the tests conducted on each, adhesion tests, work instructions, external department testing, processing of incoming swatches, and specifications for finished fabric.
- Participate in cross-training in at least one additional area to ensure productivity during periods of low volume.
Requirements
- Must stand on a tile floor for the duration of the shift.
- Engage in constant walking within the Quality Assurance and Production Labs.
- Lift boxes weighing about 20 lbs. for distances of approximately 6 feet.
- Occasionally lift molds weighing around 30 lbs.
- Hang and remove samples from poles that are 12 feet high.
- Place molds into a press that is about 12 inches high, weighing 30 lbs.
- Bend and stoop to retrieve test materials from lower cabinets.
- Capable of entering data into statistical quality control software.
- Basic math and reading skills required.
- High School Diploma is necessary.
- Compliance with protective equipment requirements is mandatory.
Benefits Available:
- Short/Long Term Medical Insurance
- Dental Insurance
- Term Life
- Short Term Disability
- Direct Deposit
- Holiday Pay
- Service Bonus
Do you meet the requirements for this job?
Lab Technician
Advanced Personnel Resources, Inc.
Kernersville, NC (Onsite)
Full-Time
$17.25/Hour
Our client is seeking a 2nd Shift Lab Technician for their facility in Kernersville. This position is temp-to-hire and on 2nd shift from 4pm to 12 am, Monday through Friday. The qualified candidate will need to complete a math test before interviewing at the facility.
Job Requirements:
-
Responsibilities
- Follow directions provided by the Lab Manager and QA Manager.
- Test incoming fabric, finished fabric, and coated fabric in accordance with finished fabric specifications and customer requirements across all company production areas.
- Accurately and thoroughly document test results on lab test forms within the specified time frames.
- Operate and verify Instron equipment, including load cells.
- Carry out special tests as assigned by the Lab Manager or QA Manager.
- Test incoming product mixes as per the batch card instructions.
- Immediately inform frame operators and the production shift supervisor of any out-of-spec test results.
- Maintain a clean and organized work environment, adhering to safety protocols; be capable of using fire extinguishers, following the fire evacuation plan, using eye wash stations, and responding to chemical spills.
- Understand urethane coating requirements and relevant testing processes.
- Be knowledgeable about all testing equipment, the tests conducted on each, adhesion tests, work instructions, external department testing, processing of incoming swatches, and specifications for finished fabric.
- Participate in cross-training in at least one additional area to ensure productivity during periods of low volume.
Requirements
- Must stand on a tile floor for the duration of the shift.
- Engage in constant walking within the Quality Assurance and Production Labs.
- Lift boxes weighing about 20 lbs. for distances of approximately 6 feet.
- Occasionally lift molds weighing around 30 lbs.
- Hang and remove samples from poles that are 12 feet high.
- Place molds into a press that is about 12 inches high, weighing 30 lbs.
- Bend and stoop to retrieve test materials from lower cabinets.
- Capable of entering data into statistical quality control software.
- Basic math and reading skills required.
- High School Diploma is necessary.
- Compliance with protective equipment requirements is mandatory.
Benefits Available:
- Short/Long Term Medical Insurance
- Dental Insurance
- Term Life
- Short Term Disability
- Direct Deposit
- Holiday Pay
- Service Bonus
Get job alerts by email.
Sign up now!
Join Our Talent Network!
Salary Details
This salary was provided in the Job Posting.
$17.25
Hourly Salary